高清看男人插曲女人视频

  • <tbody id="uwucm"><blockquote id="uwucm"></blockquote></tbody>
  • You are here: Home ? Products ? Pet Bottle Blowing Machine ? PET Blowing Machine
    PET Blowing Machine

    pet-blowing-machine
    PET Blowing Machine Description:
    Rotary PET blowing machine is used to produce various PET bottles for water, carbonated soft drink, and juice.

    pet-blowing-machine1

    Rotary?PET Blowing Machine?Feature:
    1. PET Blowing Machine
    ?is highly intelligent. All the programs are set by computer, and rotary?PET blowing machine only requires one staff to operate on the TFT touch screen. Equipped with various detection devices in many parts of the machine, if there ?is any problem to the machine, signals in the screen will correspondingly be shown.?

    2. The advanced design can save much energy. The heater can save about 15%-20% electricity compared to ?other similar devices in the market. And air recovery system in the blowing part can recovery 5%-30% air energy.

    3. Molding process of bottles is convenient to adjust since the special designed secondary blowing system can monitor the real-time changing pressure curves of the molding process and provide accurate real-time ?parameters.

    4. The operation of the machine is safe. The technology of blowing is mature enough to provide a safe product. And there are many emergency stop swtiches in the machine. To any abnormal situation, they would be at work ?automaticallyand stop the machine immediately. What’s more, the machine has approved by ISO and UL.

    Manufacture?Process Profile:

    1.?Pre-Form Inlet controlling

    Put pre-forms into hopper of auto sending device,send to heating stove through belt and drum unit.
    pet-blowing-machine6

    2.?Bottle pre-form heating controlling

    Bottle pre-forms are sent to pre-form base by guide turn?table, the bases get pre-forms and then send to stove for heating one by one.

    The heating stove has 8-floors infrared lamp?to heat pre-forms, the pre-forms run itself and also the infrared lamp?can be adjusted temperature independently.

    Heating stove has pre-form?screw head?cooling way and stove ventilation and cool air duct, it ensures that pre-forms will not be hard warmed.

    pet-blowing-machine3

    3. Blowing Technology Controlling

    Discharge warmed pre-forms to outlet guide by discharge pre-form cover, put pre-forms into blowing moulds by manipulator, seal the bottle mouth and extrude?the body, also inlet two grade air pressure(pre-blowing pressure and high pressure air) and make pre-form to be bottles. According to the requirement of art, there will inlet cooling water for moulds, all above processes are controlled by main machine computer.

    pet-blowing-machine5

    4. Bottle check and outlet

    After blowing, the manipulator?get bottles out of mould and the qualified bottle will be send to guide, this guide can be connected directly to filling line and also can connect to conveying chain, send to bottle warehouse.

    pet-blowing-machine4

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Related products
    • pet bottle blowing machine-0
      Automatic PET Bottle Blowing Mahine

      Automatic PET Bottle Blowing Machine Description: Plastic PET bottle blowing machine SY-60 PET Bottle Blowing Machine, 7000-8000PCS/h, Automatic Pet?bottle blowin......

      Time:2017-08-20
    • Linear-bottle-blowing-machine-1
      Linear Bottle Blowing Machine

      Linear bottle blowing machine working principle SY60 type Linear bottle blowing machine is mainly used for all kinds of plastic bottle pre-form stretching. Far-i......

      Time:2017-07-08
    • rotary-bottle-blowing-machine-mx-0
      Rotary Bottle Blowing Machine

      Rotary Bottle Blowing Machine Overview: MX Series rotary bottle blowing machine is the successful introduction of the latest German technology, with ASG superior......

      Time:2016-06-17
    • Linear type bottle blowing machine
      Linear PET Bottle Blowing Machine

      Linear PET Bottle Blowing Machine overview This Linear PET Bottle Blowing Machine is the introduction of foreign advanced technology counterparts on the basis of ......

      Time:2016-06-17
    • Bottle unscrambler
      Bottle unscrambler

      Equipment overview Bottle unscrambler— LP-12 LP-12-type Unscrambler is the introduction of foreign advanced technology, the need for development, development......

      Time:2016-06-17
    Keyword:Water Filling Machine | Juice Filling Machine | Blowing-Filling-Capping Combi Block Machine | Pet Bottle Blowing Machine
    Contact us
    Add: No.1 Jinnan Road, Jinfeng Town, Zhangjiagang City, Jiangsu, P.R. China
    TEL:+86-512-35005020 /+86-512-58572988
    FAX:+86-512-58572858
    E-mail:sales@asgchina.com
    高清看男人插曲女人视频
  • <tbody id="uwucm"><blockquote id="uwucm"></blockquote></tbody>